118 Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide June 2012
d. WMM_ACCESS_CONTROL is only used for qos type wifiStandard.
4. The SYSLANG parameter value will always be overridden by any user entered
language. That is, this parameter will take effect only if the user has not modified the
language via the standby menus.
5. GMTOFFSET: Valid values are a positive or negative number of hours and minutes less
than 13 hours. One to six ASCII characters, optionally beginning with “+” or “-”, followed
by one or two ASCII numeric digits whose combined value is from 0 to 12, optionally
followed by a “:” and two ASCII numeric digits that can be any of 00, 15, 30, or 45. Other
minute values in the range 01 to 59 will not generate an error but will be interpreted as if
they were 00. Minute values not 2 digits long will be rejected. Note: This parameter may
specify minutes other than 00, 15, 30, or 45 on Avaya desksets.
6. SNTPSRVR: This is an existing parameter which allows a list for Avaya desk sets and
also can be IP or DNS name but the Avaya 364x phone will only look at the first entry
and it must be an IP address (no DNS).
7. HTTPSRVR and SNMPADD: These can be specified in HAT/Admin menus as well as
the config files but we are not adding Admin menu or HAT support for lists of values. We
are adding an Admin menu item for a single HTTP server IP address (not DNS name)
and we are adding a user menu item for a single SNMP server IP address (not DNS
name). The list and the single address will not exist in the phone at the same time. When
the single IP address is set via HAT/menus, the list will be cleared. Whenever the list is
encountered in config, the single IP address will be cleared. When the phone needs to
do HTTP or SNMP, it will first try to use the single IP specified by the Admin menus. If
this is not specified, the phone will move to using the servers on the list specified in
SSON or the config files.
8. WLAN_A_SUBBANDS: Comma separated list of the following numbers. Only the sub-
bands that are available in the selected Regulatory Domain will be used. Others, if listed,
will be ignored.
a. 1 = 5.150-5.250
b. 2 = 5.250-5.350 DFS
c. 3 = 5.470-5.725 DFS
d. 4 = 5.725-5.825
e. 5 = 5.725-5.850
f. 6 = 5.470-5.650 DFS
9. SIPPROXYSRVR: This is an existing parameter which allows a list for Avaya desk sets
but the Avaya 364x phone will only look at the first IP/DNS name in the list. If the first
thing on the list is not an IP address, DNS will be attempted to resolve this for the SIP
server IP address. Note that the same is true for the SIP Proxy Server value entered via
HAT – if it is not an IP address, it is assumed to be a DNS name and DNS will be done
to resolve it.
10. SIP_SEND_INFO controls generation SIP INFO request messages for key press events.
11. SIP_CALLID_PER_LINE controls whether a unique call ID must be used for registering
each line (instead of unique per proxy) as required by some SIP servers.
To Next Page
Loading...
