Avaya 3641 - Snmp

Diagnostic Tools
Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide June 2012 93
Message type Errors Events Full
SIP <code> response received from <ipaddr> No Yes Yes
SIP <code> response sent to <ipaddr> No Yes Yes
Call established to <ipaddr> No Yes Yes
Call terminated to <ipaddr> No Yes Yes
Invalid SIP <method> request received from
<ipaddr>, rc <code>
Yes Yes Yes
Invalid SIP <code> response received from
<ipaddr>, rc <code>
Yes Yes Yes
Invalid value for <parm> in SSON data Yes Yes Yes
Invalid value for <parm> in generic config file Yes Yes Yes
Invalid value for <parm> in specific config file Yes Yes Yes
Value too long for <parm> in SSON data Yes Yes Yes
Value too long for <parm> in generic config file Yes Yes Yes
Value too long for <parm> in specific config file Yes Yes Yes
Download aborted code incompatible. Error=#### Yes Yes Yes
DCA unknown MgmtAction category code=### Yes Yes Yes
CHARGER-Battery temp out of range Yes Yes Yes
SNMP
An SNMP remote application may issue SNMP Get commands to the handset. The
handset supports only Get commands..SNMP Set and Trap commands are not
supported. An SNMP address and community string must be configured on the handset
for SNMP commands to be processed.
 SNMP IP address – The handset responds only to SNMP Get commands originating
from devices with this IP address Multiple comma separated IP addresses may be
entered in the DHCP SSON option or 46xxsettings.txt file. A single IP address may
be entered from the User Menus. If an IP address isentered from the User Menus,
any previously configured IP addresses are erased.
 SNMP Community String – The handset will respond only to SNMP Get commands if
the community string set on the handset matches the community string in the Get
command. Ensure the community string is set to the same value on the handset and
the remote SNMP application. The string can be 1-32 characters.
Remotely Configuring SNMP
You can configure both the SNMP IP address and community string remotely through
Avaya Aura® System Manager. For more information, see Device Settings Groups in
the Administering Avaya Aura® Session Manager (03-603324) documentation,
available on the Avaya Web site www.avaya.com/support.