Avaya 3641 - Page 45

Configure Each Avaya 3641/3645 IP Wireless Handset
Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide June 2012 45
Caution!
If you use the emergency dial feature, only a telephone call is setup; however the
ferature is inoperable if the wireless system or the call server fails for any reason. Do
not rely on it as your sole method of emergency notification.
Note:
Follow your dial plan rules when entering the emergency number to be dialed. For
example,,if an outside number is to be dialed and a prefix is required to obtain an
outside line, enter the prefix as part of the emergency number.
Note:
Once you enter an emergency number, you can only modifiy the number..You can clear
the number only by restoring the handset to defaults.
Time Zone
Worldwide time zone options are available. Greenwich Mean Time (GMT) is the default.
Daylight Savings
You can adjust the handset for daylight savings time.
Protected Speed-dial
The protected speed-dial number is a number that is programmed to be called in
emergencies. The number appears as the first item on the speed-dial list and is
specially marked with a greater-than symbol (>) as the first character in its name. Only
one such number can be programmed. Enter the number to be dialed and the name, for
example, Security, and scroll to assign to one key press. The choices for this key press
are 1-9, 0, *, or #. The carat represents the volume up and down buttons. This number
must be programmed in every handset. This setting cannot be modified by the user. This
feature is not available in a handset where the user has disabled Pre-dial in the Config
menu.
Password Enable/Disable/Change
The password option controls access to the Admin menu. It is enabled by default with
the password 27238. The Password option operates as a toggle between Enabled and
Disabled. The info line will display the current state. Press NavOK to change the
password protection state. You must enter the default or previously set password to
modify the password requirement and to verify the change. Change Password option
appears only if you have enabled the password..The password is disabled by default.
You must set the password in each handset for which controlled access is desired. The
password may be up to 18 characters in length. Only numbers and letters are allowed.