Avaya 3641 - Page 80

80 Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide June 2012
Config menu 2nd level 3rd level 4th level 5th level 6th level
Push-to-talk * Default Channel Channel 1
….
Channel 24
Subscribed
Channels
Channel 1
Channel 2
Channel 3
….
Channel 24
PTT Audio
Volume
Audio Volume

PTT Tone
Volume
Tone Volume

PTT Vibrate
Disable/Enable
System Info
Phone IP
Address
Alias IP Address
SVP IP Address
OAI IP Address
Software Version
Emergency Dial *
Emergency
Number
Emergency
Name
* Push-to-talk and Emergency Dial only appear if enabled.
† The SNMP option is designed for system administrator use when troubleshooting.
If the administrator selects SNMP there is a 3
rd
level menu which is a prompt to enter the
admin password if the admin password is enabled. This is the same as the password in the
Admin menu. The default password is 27238 (“CRAFT”). If the admin password is disabled
the password entry menu is skipped. Upon successful entry of the admin password (or if the
password is disabled) there is a 4
th
level menu selection that allows entry of the SNMP IP
address or SNMP Community string.
You can also configure the SNMP parameters remotely through Avaya Aura® System
Manager.
See Chapter 10: Diagnostic Tools for more information.