Avaya 3641 - Page 89

Diagnostic Tools
Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide June 2012 89
Assocfailure 00000
Assocfailure 00000
 AssocCount: The number of times the phone has associated since starting the
functional code. This number will always be at least one (the initial association) and
higher numbers reflect hard handoffs (where the phone completely lost the AP.
Note that hard handoffs in standby are normal, only hard handoffs while in call
reflect problems.
 ReAssocCount: The number of times the phone has re-associated since starting the
functional code. This is equivalent to the number of soft handoffs.
 AssocFailure: The number of times the phone has failed to associate, defined as the
number of times the phone attempts to associate minus the number of times it has
successfully associated.
 ReassocFail: The count of re-association failures, again this is tries minus
successes.
Diagnostic display #5:
....5....
Sec-ErrCount 00000
LstSeqErrSeq 00000
QosFailCnt 00000
 Sec-ErrCount: The number of radio packets that have failed to decrypt properly.
 LstSeqErrSeq: The 802.11 sequence number of the last radio packet (if any) that
failed to decrypt properly.
 QosFailCnt: The number of times the QOS admission control negotiation (TSPECS)
has failed.
Diagnostic display #6:
.....6...
EapErrCnt 00000
LstEapErCode 00000
 EapErrCnt: The number of EAP (Extensible Authentication Protocol) errors which
have happened since the phone was powered up.
 If the EapErrCnt is non-zero, the second line will show a reason code for the last
EAP error. These error codes are:
 0: No EAP error.
 1: Unknown EAP error.