Local Administrative Options
46 4600 Series IP Telephone Installation Guide
9. Press the # button to continue the procedure without changing the displayed status of
802.1Q
The following text displays left-justified at the top of the display:
where dddd is the value of the 802.1 VLAN ID.
10. Enter a valid value between 0 and 4094 for the new value of the 802.1 VLAN ID.
The following message displays:
where ddd is the value of the DHCPOFFER wait period.
11. Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.
The following message displays:
12. Press the # button to save the new values you entered.
The following message displays:
Once the new values are stored, the telephone is reset.
If a new boot program is downloaded from the TFTP server after you enter static addressing
information, you must reenter your static addressing information.
VLAN ID=dddd
New=_
VLAN test=ddd
New=_
Save new
values?
*=no #=yes
New values
being saved
To Next Page
Loading...
