Chapter 1: Introduction
Purpose
This document provides conceptual information and installation procedures for the switch hardware.
Note:
Release 5.8 is supported only on ERS 4800.
Avaya Ethernet Routing Switch 4800
The following table describes the 4800 series of Avaya Ethernet Routing switches.
Table 1: 4800 Series Switch Platforms
4800 Series Switch Model Key Features
Avaya Ethernet Routing Switch
4826GTS
24 10/100/1000BaseTX RJ-45 ports, 2 shared SFP ports, and 2
10GE SFP+ ports
Supports dual 300W 12V power supplies for redundancy and load
sharing
Avaya Ethernet Routing Switch
4826GTS-PWR+
24 10/100/1000BaseTX RJ-45 ports with PoE+, 2 shared SFP
ports, and 2 10GE SFP+ ports
Supports dual 1000W 54V power supplies for redundancy and
load sharing
Avaya Ethernet Routing Switch
4850GTS
48 10/100/1000BaseTX RJ-45 ports, 2 shared SFP ports, and 2
10GE SFP+ ports
Supports dual 300W 12V power supplies for redundancy and load
sharing
Avaya Ethernet Routing Switch
4850GTS-PWR+
48 10/100/1000BaseTX RJ-45 ports with PoE+, 2 shared SFP
ports, and 2 10GE SFP+ ports
Supports dual 1000W 54V power supplies for redundancy and
load sharing
August 2016 Installing Avaya ERS 4800 Series 5
Comments on this document? infodev@avaya.com
To Next Page
Loading...
