* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 11.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-LX
SFP transceiver.
Table 6: IEEE 802.3z 1000BASE-LX SFP specifications
Parameter Specifications
Connectors Duplex LC
Cabling • 50 micrometer (µm) multimode fiber (MMF)
• 62.5 µm multimode fiber
• 9 µm single mode fiber (SMF)
Distance • Up to 550 meters (m) using MMF
• Up to 10 kilometers (km) using SMF
Wavelength 1310 nm
Link optical power budget 10.5 dB
Transmitter characteristics
Launch power –9.5 to –3.0 dBm
Receiver characteristics
Receiver sensitivity –20 dBm
Maximum input power –3.0 dBm
1000BASE-XD CWDM SFP specifications
The 1000BASE-XD SFP transceiver provides CWDM gigabit Ethernet connectivity using single
mode fiber. This SFP transceiver supports only full-duplex operation. The part numbers of the 40 km
models range from AA1419025-E5 to AA1419032-E5*.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see
Locating end of sale notices on page 11.
Important:
For the 40 km CWDM SFP transceiver, a minimum attenuation of 4 dB must be present
between the transmitter and receiver. To avoid receiver saturation, you must insert a minimum
attenuation of 4 dB when you test the CWDM SFP transceiver in loopback mode, or use short
runs of fiber with no intermediate CWDM OADM or CWDM OMUX.
Table 7: 1000BASE-XD CWDM (40 km) SFP specifications
Parameter Specifications
Connectors Duplex LC
Table continues…
SFP
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 30
Comments on this document? infodev@avaya.com
To Next Page
Loading...
