Parameter Specifications
Cabling SMF, 9 µm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Operating temperature range 0 to 60C
Link optical power budget 17 dB
Transmitter characteristics
Launch power –4.0 to 1.0 dBm
Receiver characteristics
Receiver sensitivity –21 dBm
Maximum input power –3.0 dBm
1000BASE-ZX CWDM (LC) SFP specifications
The 1000BASE-ZX SFP transceiver provides CWDM gigabit Ethernet connectivity using single
mode fiber. This SFP supports only full-duplex operation. The part numbers of the 70 km models
range from AA1419033-E5 to AA1419040-E5*.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 11.
Important:
For the 70 km CWDM SFP transceivers, a minimum attenuation of 10 dB must be present
between the transmitter and receiver.
Table 8: 1000BASE-ZX CWDM (70 km) SFP specifications
Parameter Specifications
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Operating temperature range 0 to 60°C
Link optical power budget 20 dB
Transmitter characteristics
Launch power –3.0 to 2.0 dBm
Receiver characteristics
Receiver sensitivity –23 dBm
Maximum input power –3.0 dBm
SFP specifications
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 31
Comments on this document? infodev@avaya.com
To Next Page
Loading...
