Parameter Specification
Maximum dispersion power penalty 2 dB at 70 km
Minimum attenuation between transmit and receive
ports
5 dB
Transmitter characteristics
Launch power 0 to 5 dBm
Receiver characteristics
Receiver sensitivity –24 dBm
Maximum receiver power –0 dBm
1000BASE-XD DDI CWDM (40 km) SFP specifications
The following table describes specifications for 1000BASE-XD DDI CWDM SFP transceivers
numbered AA1419053-E6 to AA1419060-E6*.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 4 dB of attenuation exists
between the transmit and receive ports.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see
Locating end of sale notices on page 11.
Table 14: 1000BASE-XD CWDM SFP DDI (40 km) specifications
Parameter Specifications
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 17 dB
Maximum dispersion power penalty 1 dB at 40 km
Transmitter characteristics
Launch power –4.0 to 1.0 dBm
Receiver characteristics
Receiver sensitivity –21 dBm
Maximum receiver power –3.0 dBm
SFP specifications
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 35
Comments on this document? infodev@avaya.com
To Next Page
Loading...
