1000BASE-ZX DDI CWDM 70 km SFP specifications
The following table describes specifications for CWDM SFP transceivers numbered AA1419061-E6
to AA1419068-E6*.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 8 dB of attenuation is present
between the transmit and receive ports.
* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 11.
Important:
AA1419065–E6 remains available to purchase.
Table 15: 1000BASE-ZX CWDM SFP (70 km) specifications
Parameter Specifications
Maximum electrical power consumption 1.0 W
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 24 dB
Maximum dispersion power penalty 2 dB at 70 km
Transmitter characteristics
Launch power 0 to 5.0 dBm
Receiver characteristics
Receiver sensitivity –24 dBm
Maximum receiver power –3.0 dBm
1000BASE-BX bidirectional SFP transceivers
The 1000BASE-BX bidirectional DDI SFP transceivers provides gigabit Ethernet connectivity over a
single fiber.
Warning:
Risk of equipment damage
For the 40 km transceivers only. Connect the 1000BASE-BX SFP transceiver using a single
mode fiber with at least 6 dB of attenuation. Damage can result if insufficient attenuation is
provided or if the same 1000BASE-BX SFP transceivers are connected.
SFP
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 36
Comments on this document? infodev@avaya.com
To Next Page
Loading...
