10GBASE-ER/EW SFP+ specifications
The 10GBASE-ER/EW SFP+ transceiver provides a reach of up to 40 km at a wavelength of 1550
nm.
For more information about the 10GBASE-ER/EW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW SFP+
transceiver. The part number of this SFP+ transceiver is AA1403013-E6.
Table 25: IEEE 802.3ae 10GBASE-ER/EW SFP+ transceiver specifications
Parameter Specifications
Line rate (nominal) 10GBASE-ER/EW 10.3125 Gb/s ±100 ppm (10 GbE)
Center wavelength range 1530 to 1565 nm; nominal 1550 nm
Distance Up to 40 km
Link optical power budget 15 dB
Transmitter and dispersion power penalty 3.0 dB at 40 km
Transmitter characteristics
Launch power –4.7 to 4.0 dBm
Minimum side mode suppression ratio 30 dB
Minimum launch power in OMA minus transmission
and dispersion penalty (TDP)
–2.1 dBm
Minimum optical modulation amplitude –1.7 dBm
Maximum average launch power of OFF transmitter –30 dBm
Minimum extinction ratio 3.0 dB
Maximum RIN
12
OMA –128 dB/Hz
Maximum optical return loss tolerance –21 dB
Receiver characteristics
Average receive power for BER 10
-12
– 15.8 dBm to –1.0 dBm
Maximum receive power for damage 4.0 dBm
Maximum receiver sensitivity in OMA –14.1 dBm
Maximum receiver reflectance –26 dB
Stressed receiver sensitivity in OMA –11.3 dBm
Receive electrical 3 dB upper cutoff frequency
(maximum)
12.3 GHz
The following list shows examples of an OFF transmitter:
• No power supplied to the PDM.
• Laser shutdown for safety conditions.
• Activation of PMD_global_transmit_disable or other optional transmitter shutdown
condition.
SFP+
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 50
Comments on this document? infodev@avaya.com
To Next Page
Loading...
