Issue 1 September 2008 17
Chapter 2: Customizing the Content
Introduction
This chapter provides the steps needed to enable customization, then details steps required to
create customized content on the 9600 series SIP IP phones.
Enable Customization
To enable customization on the 9600 series SIP IP Phone:
1. Download the 9600template.zip file from the Avaya Support Web site:
http://www.avaya.com/support.
2. Extract the zip file and copy the sample files to the root folder of your file server.
Note: The generic term "file server" refers to both "HTTP server" and "HTTPS server".
3. Configure the 46xxSettings.txt file
4. Navigate to the section SETTINGS9640, and modify the following parameters:
SET CURRENT_CONTENT "http://<webserver>/content.xml"
SET SKINS "example=http://<webserver>/skins/example/9640.xml"
SET CURRENT_SKIN "example"
In the above example, <webserver> should be replaced with HTTP server which is
deployed in your environment.
Important: The SET SKINS value must be on one line.
Refer to the Avaya one-X™ Deskphone Edition for 9600 Series IP Telephone Administrator
Guide (Document Number 16-603158) for more information.
5. You will also need to modify the content.xml file to customize the content that displays on
your IP phone. This file is available from the Avaya Support Web site
6. Reboot the phone.
To Next Page
Loading...
