2. Select the contact you want to view.
3. Press Details to see the information available for that contact.
Selecting Details is the only way to dial a second or third number for a contact.
4. Press the appropriate softkey to call or edit this contact, delete this contact, or return
to the Contacts screen.
Adding a new contact
About this task
You can add up to three numbers for a contact.
Procedure
1. Press Contacts.
2. Press New if this is your first contact list entry, or press More then New if you already
have entries in your contact list.
3. Enter the name using the dialpad.
• Press the number key that corresponds to the letter or number you want to
enter until the letter or number is displayed.
• If the characters are on the same key, pause before entering the next
character.
• To enter a space, press 0.
• Enter remaining letters or numbers.
• To delete the last character, press the Bksp softkey.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle
of the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press the Bksp softkey to remove the character to the left
of the cursor.
• Press More > Abc to change between upper and lower case letters or to enter
numbers.
• Press ABC again to cycle through the options (Abc/123/abc/ABC) until the type
you want to use is displayed.
• Press More > Symbols to enter characters that are not on your dialpad.
Using the contacts feature
52 Avaya one-X
®
Deskphone H.323 for 9640 and 9640G IP Deskphone User Guide January 2013
Comments? infodev@avaya.com
To Next Page
Loading...
