Avaya 9641GS - Page 81

Parameter name Default value Description and value range
CLEAR_EXTPSWD_ON_LO
GOUT
0 Specifies whether the extension and password are not
displayed on a logged out deskphone. Valid values are:
• 0: The extension and/or password are displayed
depending upon other parameters.
• 1: The extension and password are not displayed in all
cases
CERT_WARNING_DAYS 60 Specifies the number of days before the expiration of a
certificate that a warning should first appear on the phone
screen. Log and syslog messages are generated for
expired certificates. The warning reappears every 7 days.
Valid values are 0 to 99. The value 0 disables the
warning.
CONFSTAT 0 Specifies whether the conference button is enabled or
disabled when CCBTNSTAT is 0. Valid values are:
• 0: The Conference button is disabled when
CCBTNSTAT is 0.
• 1: The Conference button is enabled.
CTASTAT 2 Call Type analysis status. Controls whether call type
analysis algorithm in the Avaya Aura
®
Communication
Manager is used during certain dialing behaviors.
• 0: History, Redial, WML Browser, and Contacts do not
use smart enbloc even if smart enbloc is enabled or
supported by Avaya Aura
®
Communication Manager.
• 1: Use smart enbloc if smart enbloc is enabled/
supported by Avaya Aura
®
Communication Manager by
History, Redial and WML browser, but not for Contacts.
• 2: Use smart enbloc if smart enbloc is enabled/
supported by Avaya Aura
®
Communication Manager by
History, Redial and WML browser, but not for Contacts
(Default).
DEFAULTRING 9 DEFAULTRING specifies the default ring tone.
Valid values are 1 through 14.
DHCPPREF 6 Applies only to deskphones running software Release 6.0
and later. Specifies whether new values received via
DHCPv4 or DHCPv6 are preferred when both are used.
Valid values are:
4=DHCPv4 is preferred.
6= DHCPv6 is preferred.
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 81
Comments on this document? infodev@avaya.com