Parameter name Default value Description and value range
DHCPSRVR “ ” (Null) Specifies DHCP server address(es). Format is dotted
decimal or DNS format, separated by commas, with no
spaces. Zero to 255 ACSII characters, including commas.
DHCPSTD 0 DHCP Standard lease violation flag. Indicates whether to
keep the IP address if there is no response to lease
renewal. If set to 1, (No) the deskphone strictly follows
the DHCP standard with respect to giving up IP
addresses when the DHCP lease expires. If set to 0,(Yes)
the deskphone continues using the IP address until it
detects reset or a conflict.
DIALFEATURES “ ” (Null) A list of feature number identifiers for softkey features
available in the Dialing call state, for example, Redial.
Zero to 255 ASCII characters consisting of zero to five
whole numbers separated by commas without any
spaces.
DNSSRVR 0.0.0.0 Text string containing the IP address of zero or more DNS
servers, in dotted-decimal format, separated by commas
with no intervening spaces, 0-255 ASCII characters,
including commas.
DOMAIN “ ” (Null) Text string containing the domain name to be used when
DNS names in parameter values are resolved into IP
addresses. Valid values are 0-255 ASCII characters. If
Null, do not leave spaces.
DOT1X 0 802.1X Supplicant operation mode. Valid values are: 0=
With PAE pass-through, 1= with PAE pass-through and
proxy Logoff, 2=without PAE pass-through or proxy
Logoff.
DOT1XEAPS MD5 Specifies the EAP method used for 802.1X operation.
Valid values are MD5 and TLS .
DOT1XSTAT 0 Determines how the deskphone handles Supplicants.
Valid values are: 0= Supplicant operation is completely
disabled. 1=Supplicant operation is enabled, but
responds only to received unicast EAPOL messages. 2 =
Supplicant operation is enabled and responds to received
unicast and multicast EAPOL messages.
DOT1XWAIT 0 Specifies whether the telephone will wait for 802.1X
authentication to complete before initiating DHCP
Valid values, 0 and 1
If DOT1XWAIT = "0" when the 802.1X Supplicant is
started, startup will continue without waiting for 802.1X
authentication to complete, =1 Startup will not continue.,
DROPCLEAR 1 VPN only. Specifies how clear IPsec packets are
processed. One ASCII numeric digit. Valid values are: 0=
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 82
Comments on this document? infodev@avaya.com
To Next Page
Loading...
