Parameter name Default value Description and value range
LANGxFILE “ ” (Null) Contains the name of the language file x, where x is 1
through 4. The file name must end in .txt. Example: SET
LANG1FILE “mlf_russian.txt”
LANG1FILE =
LANG2FILE =
LANG3FILE =
LANG4FILE =
LANGLARGEFONT “ ” (Null) Larger text font file name. A string of up to 32 characters
specifies the loadable language file on the HTTP server
for the Large Text font.
LANGSYS “ ” (Null) System-wide language that contains the name of the
default system language file, if any. Value is 0 to 32 ASCII
characters. The file name must end in .txt. The default is
a null string. Example: SET LANGSYS
mlf_german.txt
Note:
This parameter applies only if the user has not
changed the Screen & Sound Options from the
deskphone menu. The changes made by the user
are stored in the backup/restore file as LANGUSER,
if BRURI has a valid value. The value of the
LANGUSER parameter in the backup/restore file
takes precedence over the LANGSYS parameter.
User can use the Clear operation to reset the
configuration.
LEDMODE 0 Supports new LED behavior Valid values 0= Old
behavior, and would mean that the red led is controlled
locally by the phone, 1=New behavior and would mean
the buttons red LEDs are controlled by CM .
Example: If new behavior is activated, Button module and
phone LEDs are aligned and will change according to call
state.
LLDP_XMIT_SECS 30 Specifies the rate in seconds at which LLDP messages
will be transmitted.
Valid values are 1 to 4 ASCII numeric digits, “1” through
“3600”
Main usage is for the SSO application to discover the
phone faster.
LOCALZIPTONEATT 35 Controls the local phone ziptone volume when
AUTOANSSTAT= 1 Note: If Auto answer is configured on
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 87
Comments on this document? infodev@avaya.com
To Next Page
Loading...
