Parameter name Default value Description and value range
the CM and not using the AUTOANSSTAT setting, this
parameter does not influence that zip tone volume.
Valid values: 0-95 where 0= Loudest and 95= Lowest.
LOGBACKUP 1 Indicates whether the call log of the user should be
backed up. Values are: 1=Yes. The Call Log is backed up
to the same backup file as all other user data subject to
normal administration of that file. 0=No.
LOGLOCAL 0 Event Log Severity Level. Valid values are one 0-8 ASCII
numeric digit. Controls the level of events logged in the
endptRecentLog and endptResetLog objects in the
SNMP MIB. Events with the selected level and with a
higher severity level are logged. Valid values are:
0=Disabled, 1=emergencies, 2=alerts, 3=critical,
4=errors, 5=warnings, 6=notices, 7=information,
8=debug.
LOGMISSEDONCE 0 Indicates that only one Call Log entry for multiple Missed
calls from the same originating phone number must be
maintained. Values are: 1=Yes; each Missed Call Log
entry is maintained, along with a Missed Call counter that
tracks the number of times (up to 99) the originating
number called. 0=No; each Missed Call creates a new
Call Log entry.
LOGSRVR “ ” (Null) Syslog Server IP address. Zero or one IP address in
dotted-decimal, colon-hex, or DNS Name format (0-15
ASCII characters).
LOGUNSEEN 0 Indicates that a Call Log entry should be maintained for
calls that are redirected from the deskphone, for example,
Call forwarded calls. Values are: 1=Yes; 0=No. CM 5.2 or
later is required for this feature to work.
LOGTOFILE 0 Specifies whether optional debug printf strings will be
logged to an internal file.
If LOGTOFILE=1, optional debug printf strings are logged
to an internal file, =0 not logged.
MCIPADD 0.0.0.0 Call Server address. Zero or more Avaya Communication
Manager server IP addresses. Format is dotted-decimal
or DNS name format, separated by commas without
intervening spaces (0-255 ASCII characters, including
commas). Null is a valid value.
MSGNUM “ ” (Null) Voice mail system deskphone or extension number.
Specifies the number to be dialed automatically when the
deskphone user presses the Message button. MSGNUM
is only used when the phone is aliased using non-native
support. Messaging must be configured for native
support. Value: 0-30 ASCII dialable characters are 0
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 88
Comments on this document? infodev@avaya.com
To Next Page
Loading...
