Avaya 9641GS - Page 89

Parameter name Default value Description and value range
through 9, star (*) and pound (#) and no spaces. Null is a
valid value.
MUTESTAT 0 Specifies whether the Mute button is enabled or disabled
when CCBTNSTAT is 0. Valid values are:
• 0: The Mute button is disabled when CCBTNSTAT is 0.
• 1: The Mute button is enabled.
MYCERTCAID “CAIdentifier” Certificate Authority Identifier to be used in a certificate
request. 0 to 255 ASCII characters.
MYCERTCN “$SERIALNO” Common Name of the Subject of a certificate request. 0
to 255 ASCII characters that contain the string
$SERIALNO or $MACADDR.
MYCERTDN “ ” (Null) Additional information for the Subject of a certificate
request. 0 to 255 ASCII characters.
MYCERTKEYLEN 1024 Bit length of the private key to be generated for a
certificate request. 4 ASCII numeric digits, 1024 through
2048.
MYCERTKEYUSAGE NULL Specifies the purpose for which a certificate is issued. 0
to 255 ASCII characters. List of text strings, separated by
commas without any intervening spaces, that is
compared to the values specified for the X.509 KeyUsage
extension. For each matching value, the corresponding
bit will be set in the SCEP PKCSReq; invalid strings will
be ignored; Possible values are: "digitalSignature",
"nonRepudiation", "keyEncipherment",
"dataEncipherment", "Agreement", "keyCertSign",
"cRLSign", "encipherOnly", "decipherOnly".
MYCERTRENEW 90 Percentage of a certificate's Validity interval after which
renewal procedures will be initiated. 1 or 2 ASCII numeric
digits, 1 through 99.
MYCERTURL “ ” (Null) URL to be used to contact an SCEP server. Zero to 255
ASCII characters, zero or one URL.
MYCERTWAIT 1 Specifies whether the deskphone will wait until a pending
certificate request is complete, or whether it will
periodically check in the background. 1 ASCII numeric
digit, 0 or 1 as follows:
1 = If a connection to the SCEP server is successfully
established, SCEP will remain in progress until the
request for a certificate is granted or rejected.
0 = SCEP will remain in progress until the request for a
certificate is granted or rejected or until a response is
received indicating that the request is pending for manual
approval.
Table continues…
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 89
Comments on this document? infodev@avaya.com