Redialing a number
1. From the Phone screen, touch Redial.
The last number will be redialed or you will see a list of the most recent numbers
that you have dialed, from which you can select one to redial. See Setting redial
options on page 20 for information on redial settings.
Note:
Your system administrator can disable Redial functionality.
2. Touch the number you want to redial.
Using voice dialing
You can say a name to search for and call any contact when voice dialing is set to on. You can
optionally add a qualifier like "at home" or "mobile" with the name to get to a specific number
for the contact. The first two times you use voice dialing, a help screen displays to assist you
in using this feature.
1. Press Contacts.
If Voice dialing is enabled, a Voice softkey displays.
2. When voice dialing is active a green bar displays on the top of the Voice softkey. If
you don't say a name, after a while voice dialing times out and the green bar
disappears. If no tone is generated or if no green bar appears next to the Voice
softkey, touch Voice again to restart voice dialing.
Note:
To make voice-initiated dialing available each time you access your contacts, see
Changing the voice dialing setting on page 19. To change the language you want
to use for voice dialing commands, see Changing the voice dialing language on
page 19.
3. Within a few seconds or as soon as you hear the tone, say the name of the person
you want to call.
You can say the name in first name, last name order even if the name is displayed as
last name, first name order (and separated by a comma) in your Contacts list. You
can add a qualifier, for example, “at home”, “at office”, “mobile phone”, “cell phone”,
or say one of the contact number types (Home, Work, Mobile) with the name. For
Making a call
32 Avaya one-X
™
Deskphone Edition for 9670G IP Telephone User Guide May 2009
To Next Page
Loading...
