B109
SETUP
2. Hold down for two seconds on the Avaya B109. This makes the B109 visible to CU360.
The
icon is displayed on your B109, and the LEDs ash blue.
3. In the selected Bluetooth settings window of the CU360, the Avaya B109 appears in the
available devices list. Select the Avaya B109 from the list of devices and select pairing.
After 60 seconds in pairing mode, the B109 returns to normal mode even if pairing is
unsuccessful.
Note: It can take some time for your CU360 to nd the B109 device. If the pairing is
successful, the icon
is displayed on the B109, and it is listed as “Connected” under the
CU360 Bluetooth Paired Devices.
Note: Pairing and reconnecting can also be achieved using NFC. Simply tap your Avaya
B109 NFC-logo to the CU360 NFC-logo on the upper side.
To Next Page
Loading...
