DNM-NT/Windows 2000 4.0 Installation and Getting Started
3 Installing DNM
Installation Checklist
December 2001
Page 29
Installation Checklist
Installers must complete the installation tasks in the order presented below.
1 Verify that the customer has completed the pre-installation tasks and installed the
current release of the Windows NT/Windows 2000 platform. Refer to "Customer
Pre-Installation Checklist" on page 26.
2 Assemble the required materials and information, including:
• System administrator login and password
• Completed PA001 form
• DEFINITY Network Management Release 4.0 for NT/Windows 2000 CD-ROM
• Printed copy of this book
• Technical Services Center (TSC) number: see Table 1 on page 9
3 Complete the installation procedure:
• "Adding DEFINITY Proxy Agents" on page 40
4 Verify the DNM installation.
Refer to the sections below in Chapter 5, "Getting Started":
Note: After the DNM-NT/Windows 2000 installation, system administrators or root users
can execute the tasks in Chapter 4, "System Administration".
To Next Page
Loading...
