Next Steps
Issue 1 May 2009 29
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT - January 25, 2009 - 1:38 PM
Next Steps
Using Avaya IW and GIW
The full configuration process is performed using the Avaya Installation Wizard or Gateway Installation
Wizard interface. For more detailed information about IW and GIW:
● See the online help for IW and GIW at http://support.avaya.com/avayaiw.
● Review Job Aid: Avaya Installation Wizard, 555-245-754, and Job Aid: Avaya Gateway Installation
Wizard, 555-245-756.
Using the Command Line Interface
For information about configuring the G430 with the Command Line Interface:
● For instructions on how to connect to the CLI, review Chapter 4 of Administration for the Avaya G430
Media Gateway, 03-603228 - Accessing the Avaya G430 Media Gateway.
● For detailed information about CLI commands, refer to the Avaya G430 CLI Reference, 03-603234.
To Next Page
