Avaya J100 - Page 123

Name Description
Contact Name display logic Specifies how to match a dialed string on an incoming call with
the users contacts.
The options are:
• Match the number completely (default)
• Match shorter number completely to the rightmost digits
of longer number
• Match at least 4 rightmost digits
Emergency Call
Emergency Numbers Specifies the emergency contact number.
Note:
Emergency calls are not supported in an Open SIP
environment.
Emergency Softkey Specifies whether the Emergency softkey is displayed after the
phone is registered.
The options are:
• Do Not Display
• Display without Confirmation
• Display with Confirmation (default)
Softkey Emergency Number Specifies the number(s) which is dialed when the Emergency
softkey is pressed.
The valid value is up to 30 dialable characters. The default
value is empty.
Value format: digits from 0 to 9, *, #.
Emergency Softkey on
Unregistration
Specifies whether the Emergency softkey is displayed when
the phone is not registered.
The options are:
• Do Not Display
• Display without Confirmation
• Display with Confirmation (default)
Phone Lock
Enable Phone Lock Specifies whether the Lock feature is enabled on the phone.
The options are:
• Do Not Allow (default)
• Allow
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 123
Comments on this document? infodev@avaya.com