Avaya J100 - Page 231

Parameter name Default
value
Description
BAKLIGHTOFF 120 Specifies the number of minutes of
idle time after which the display
backlight will be turned off.
Phones with gray-scale displays do
not completely turn backlight off,
they set it to the lowest non-off
level.
Valid values are 0 through 999.
A value of 0 means that the display
backlight will not be turned off
automatically when the phone is
idle.
For ENERGY STAR compliance on
applicable phones, a value of 20 is
recommended.
BLOCK_CERTIFICATE_WILDCARDS 0 Specifies whether the endpoint will
accept server identity certificates
with wildcards.
Value operation:
• 0: Accept wildcards in certificate.
• 1: Do not accept wildcards in
certificates.
BRANDING_VOLUME 5 Specifies the volume level at which
the Avaya audio brand is played.
Value operation:
• 8: 9db above nominal
• 7: 6db above nominal
• 6: 3db above nominal
• 5: nominal
• 4: 3db below nominal
• 3: 6db below nominal
• 2: 9db below nominal
• 1:12db below nominal
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 231
Comments on this document? infodev@avaya.com