Avaya J100 - Page 235

Parameter name Default
value
Description
CONFIG_SERVER_SECURE_MODE 1 Specifies whether HTTP or HTTPS
is used to access the configuration
server.
Value operation:
• 0: HTTP
• 1: HTTPS
• 2: Use HTTPS if SIP transport
mode is TLS, otherwise use
HTTP.
This parameter is not supported in
IP Office environment as PPM is
not supported.
CONTACT_NAME_FORMAT 0 Specifies how contact names are
displayed.
Value operation:
• 0: The name format is Last name,
First name.
• 1: The name format is First name,
Last name.
CONTROLLER_SEARCH_INTERVAL 16 Specifies the number of seconds
the phone will wait to complete the
maintenance check for monitored
controllers.
Valid values are 4 through 3600.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 235
Comments on this document? infodev@avaya.com