Avaya J100 - Page 244

Parameter name Default
value
Description
EEESTAT 1 Specifies Energy-Efficient Ethernet
(802.3az) is enabled on PHY1 and
PHY2.
This parameter is supported by only
Avaya J129 IP Phone.
Value operation:
• 0: EEE is disabled on both PHY1
and PHY2.
• 1; EEE is enabled on both PHY1
and PHY2.
ELD_SYSNUM 1 Controls whether Enhanced Local
Dialing algorithm will be applied for
System Numbers-Busy Indicators
and Auto Dials.
Value operation:
• 0: Disable ELD for System
Numbers
• 1: Enable ELD for System
Numbers
Note:
Avaya J139 IP Phone does not
support Busy Indicator feature.
ENABLE_3PCC_ENVIRONMENT 1 Specifies that the phone is working
in the Third-party call control setup
environment.
Value operation:
• 0: Disabled
• 1: Enabled
Set the parameter to 0 for Avaya
Aura
®
and IP Office environment.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 244
Comments on this document? infodev@avaya.com