Avaya J100 - Page 332

Element
name
Attributes and values Description
<anchor>
The following attributes are supported:
•
accesskey
The value is one character which can
be digits 0 – 9, ‘*’ or ‘#’
•
style
•
title
Enables nagivation between WML cards of
the same deck or a different one.
<img>
The following attributes are supported:
• alt: specifies alternative text to
display if the image cannot be
rendered.
The default value is Image not
rendered.
• hspace: specifies space to the left and
to the right of the image, either in
pixels (n) or as a percentage of the
phone screen width (n%).
The default value is 0 pixels.
• src: specifies the URL from which the
image is obtained.
•
style
• vspace: specifies the space above
and below the image either in pixels
(n) or as a percentage of the scroll
panel height (n%).
The default value is 0 pixels.
A WML element used to include an image in a
WML card.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 332
Comments on this document? infodev@avaya.com