Procedure
1. Press Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to System, and press Select.
4. Scroll to Server type.
Recording audio parameters
About this task
Use this procedure to record audio parameters information in your phone.
Note:
The saved audio parameters information is used for audio debugging.
Procedure
1. Press Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to Audio parameters, and press Select.
4. Press the Record soft key.
5. To stop the recording, press the Stop soft key.
Recording audio parameters
October 2019 Using Avaya J169/J179 IP Phone in an Open SIP environment 119
Comments on this document? infodev@avaya.com
To Next Page
Loading...
