7. Press Save.
Customizing Presence parked call indication
About this task
Use this procedure to customize the various indicators when a call is parked at the monitored
user’s extension number.
Note:
This setting applies to all your monitored users.
Procedure
1.
Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Alerting on calls, and press Select.
5. Scroll to Presence, and press Select.
6. Scroll to Parked indication, and select one of the following:
• None: To set the Presence parked call indication to none.
• Audible: To set the Presence parked call indication as an audible ringtone.
• Visual: To set the Presence parked call indication to visual.
When a call is parked at monitored user’s extension number, you can view the parked
call details on a pop-up screen similar to the primary line incoming call.
• Both: To set the Presence parked call indication to both audible and visual.
• Default: To set the Presence pick up indication, selected by your system administrator.
7. Press Save.
Customizing the ring tone
Before you begin
Ensure your administrator enables customizing the ring tone.
Ensure BLF incoming call indication or BLF parked call indication is set to Audible or Both.
Procedure
1.
Press
Main menu.
Customizing Presence parked call indication
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 107
Comments on this document? infodev@avaya.com
To Next Page
Loading...
