Avaya J169 - Authenticating XSI; Backup and Restore; Backup and Restore Overview

Authenticating XSI
About this task
Authenticate XSI in the following cases:
• XSI fails when account is configured on BroadWorks portal and the BroadSoft user id does
not match the SIP authorization username.
• XSI fails when SIP authorization method is disabled on BroadSoft for some reason.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll down to XSI authentication, and press one of the following:
• Select
• OK
• The corresponding line key
4. In Authentication method: Press Toggle to choose one of the method:
• SIP: when the credentials fail authentication on the BroadWorks portal.
• Web: when SIP authorization method is disabled on BroadSoft.
- Enter the web access password.
5. Press Enter.
Backup and restore
Backup and restore overview
The phone supports the backup and restoration of the following user-specific data:
• User contacts
• Local ring type
• Local Do Not Disturb status
• Local call forward settings
• Auto-answer mode configuration
• Speed dial settings
• Language
Authenticating XSI
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 155
Comments on this document? infodev@avaya.com