Avaya one-X 1603SW - Page 38

Avaya Aura Communication Manager Administration
38 Avaya 1603SW-I SIP Deskphones Administrator Guide
Feature - Related
System Parameters
(page 4)
change
system-parameters
features
Directed Call
Pickup
This CM setting controls the
availability of directed call
pickup.
Feature - Related
System Parameters
(page 4)
change
system-parameters
features
Extended Group
Call Pickup
This CM setting allows a user
to answer calls that were
directed to another call
pickup group.
Feature - Related
System Parameters
(page 17)
change
system-parameters
features
Whisper Page
Tone Given To
This CM setting controls who
hears the whisper page.
Define the dial plan
formats on the Dialplan
Analysis Table form
change dialplan
analysis
Call Type Includes all telephone
extensions and OPS Feature
Name Extensions (FNEs). To
define the FNEs for the OPS
features listed in Table
, a
FAC must also be specified
for the corresponding feature.
In a sample configuration,
telephone extensions are five
digits in length and begin with
3 or 4, FNEs are five digits
beginning with 7, and the
access codes have various
formats as indicated with the
Call Type of “fac.”
Define the access codes
corresponding to the
OPS FNEs on the
Feature Access Code
form
change
feature-access-codes
Various fields on
pages 1-5 of the
form
After defining the FACs,
define the FNEs not
provisioned by CM
feature buttons using the
command
change
off-pbx-telephone
feature-name-
extensions
Used to support both OPS
and Extension to Cellular.
Set the appropriate
service permissions to
support OPS features on
the Class of Service
form
change cos Varied y (Yes) or n (No)
Table 7: CM/SIP Configuration Requirements (continued)
Task/Form Command Field(s) Value(s)
2 of 5