Avaya one-X 1603SW - Page 39

CM/SIP IP Deskphone Configuration Requirements
Issue 1 June 2010 39
Enable applicable calling
features on the Class of
Restriction form
change cor Varied To use the Call Pickup
feature, the Can Use Directed
Call Pickup and Can Be
Picked Up By Call Pickup
fields must be set to "y" for
the affected stations. Note
that Page 3 can be used to
implement a form of
centralized call screening for
groups of stations and trunks
Add a station for each
SIP phone to be
supported using the
Station form (page 1)
add station xxxxxx
(where xxxxxx
represents the
extension number)
Extension Assign the same extension
as the CM call server
extension administered in
Session Manager or SES
See Chapter 5: Session
Manager (SM) and SIP
Enablement Services (SES)
Administration.
(Station) Type Use 9620SIP.
Port System-populated.
Coverage Path For voice messaging or other
hunt group, if available.
COS and COR Same values as administered
in the previous COS & COR
section(s).
Name The person associated with
the telephone. This name
should match what is entered
for name in the Avaya
Session Manager or Avaya
SES proxy configuration.
Message Lamp
Ext
Enter the extension of the
station you want to track with
the message waiting lamp.
(Usually the same extension
initially entered on the Station
form.)
Table 7: CM/SIP Configuration Requirements (continued)
Task/Form Command Field(s) Value(s)
3 of 5