Administering Options for the 1603SW-I SIP IP Deskphones
Issue 1 June 2010 77
ENABLE_PPM_
SOURCED_
SIPPROXYSRVR
1 Enables PPM as a source of SIP proxy server
information. Valid values are:
0 = Do not use PPM as a source for SIP proxy server
information.
1 = Use PPM for SIP proxy server information.
FAILED_SESSION_
REMOVAL_TIMER
30 Timer to automatically remove a failed call session.
Range in seconds is 5 to 999.
FONTFILE " " (Null) Name of the font file for a language for a 1603SW-I SIP
IP Deskphone.
GMTOFFSET 0:00 Offset used to calculate time from GMT reference time.
Default string length positive or negative number of hours
and minutes less than 13 hours. Consists of 1 to 6
characters, optionally beginning with "+" or "-", followed
by one or two number digits whose combined value is
from "0" to "12" optionally followed by a ":" and two
numeric digits whose combined value is from "00" to
"59".
HTTPDIR " " (Null) HTTP server directory path. The path name prepended to
all file names used in HTTP and HTTPS get operations
during initialization/HTTP downloads. Value: 0-127 ASCII
characters, no spaces. Null is a valid value. Leading or
trailing slashes are not required. The command syntax is
“GET HTTPDIR myhttpdir” where “myhttpdir” is your
HTTP server path. HTTPDIR is the path for all HTTP
operations.
HTTPPORT 80 Destination TCP port used for requests to the HTTP
server during initialization. Range is 0 - 65535.
HTTPSRVR 0.0.0.0 List of IP Address(es) or DNS Name(s) of HTTP file
server(s) used to download telephone files. HTTP server
addresses can be in dotted decimal or DNS format, and
must be separated by commas (0-255 ASCII characters,
including commas).
ICMPDU 1 Controls whether ICMP Destination Unreachable
messages will be processed. Values are:
0=DU messages not transmitted
1= DU messages not transmitted in response to specific
events
2= DU message with code 2 will be transmitted in case of
specific events
ICMPRED 0 Controls whether ICMP Redirect messages will be
processed. Values are:
0 = Redirect messages will neither be transmitted nor
received Redirect messages will be supported
1 = Redirect messages will not be transmitted, but
received Redirect messages will be supported per RFC
1122
Table 11: 1603SW-I SIP IP Deskphones Customizeable System Parameters (continued)
Parameter Name Default
Value
Description and Value Range
4 of 10
To Next Page
Loading...
