Overview 47
4 Programming System
Features
Overview
This chapter describes the programming of a few of the most commonly used
system-wide features:
• System Speed Dial
• Dialing Restrictions and Permissions
• Groups of Extensions
A table listing all the system-wide features (designated by a # code) appears
later in this chapter.
System Speed Dial
Program a list of up to 100 frequently-dialed numbers for the system by using
System Speed Dial. After you have programmed the numbers, anyone on the
system can dial a System Speed Dial number by pressing
f (or # at
intercom dial tone on a single-line telephone) and the three-digit code, from 600
through 699, for that number. You can mark System Speed Dial numbers to
override dialing restrictions.
A System Speed Dial number can be up to 28 characters in length and can
consist of the digits 0–9,
*, #, and the special dialing characters. You assign
the number to one of the codes 600 through 699.
To Next Page
Loading...
