EasyManua.ls Logo

Avaya S8300 - Page 5

Avaya S8300
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SZ; Reviewed:
SPOC 8/10/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
5 of 30
ACM-Cisco-CM-GK.doc
change ip-network-region 1 Page 1 of 19
IP NETWORK REGION
Region: 1
Location: Home Domain:
Name:
Intra-region IP-IP Direct Audio: no
AUDIO PARAMETERS Inter-region IP-IP Direct Audio: no
Codec Set: 1 IP Audio Hairpinning? n
UDP Port Min: 16384
UDP Port Max: 32767 RTCP Reporting Enabled? y
RTCP MONITOR SERVER PARAMETERS
DIFFSERV/TOS PARAMETERS Use Default Server Parameters? y
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 3
Audio 802.1p Priority: 6 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5
Page 3 of 19 shows that calls between network region 1 and 2 are allowed, up to the 256:Kbps.
Calls above the specified limit will not be permitted, and may be re-routed to a different path.
The bandwidth usage is based on the packet size and codec selection. Avaya supports IP Call
Admission Control via Bandwidth Limits (CAC-BL). Codec set 2 is used for calls between
regions 1 and 2.
change ip-network-region 1 Page 3 of 19
Inter Network Region Connection Management
src dst codec direct Total Video Dyn
rgn rgn set WAN WAN-BW-limits WAN-BW-limits Intervening-regions CAC IGAR
1 1 1
1 2 2 y 256:Kbits 0:Kbits n

Other manuals for Avaya S8300

Related product manuals