© 2016 Avaya Inc. All rights reserved. NDA Confidential; use pursuant to your agreement.
Release Notes for Avaya Scopia® XT Series What’s New | 43
In a point to point call, the link quality indicator level is displayed in the XT user interface complete
top header. If the level is "Normal" or below, it is also displayed as an alert over the video, when the
top header is not visible.
Figure 8: Link Quality Indicator on XT Top Header Bar
In a multipoint call hosted by the XT built-in MCU, the level is displayed as overlay image on remote
participants' video.
The level is also visualized in the statistics of each active call.
Figure 9: Link Quality Indicator in Participants' Video
Figure 10: Link Quality Indicator in Participants' Stats
International Call Prefix
The International Call Prefix (also called International Direct Dial code, IDD) can be configured in
this version. If configured, the specified numeric code will replace the leading '+' symbol when
placing outgoing calls. Usually ‘+’ is expanded with a default code in most country (for instance 00 in
Europe). For other countries, a default expansion is not available and should be configured.
For any country, IDD expansion can be changed or disabled. To disable IDD expansion, clear the
field (or leave it empty).
To change default IDD expansion, browse to
[GUI] CONFIGURE >ADVANCED>SYSTEM>LOCATION>
[WEB] ADMINISTRATOR SETTINGS>SYSTEM>LOCATION>
International Call Prefix: Configure the numeric code to replace a leading '+' in a numeric dialed
number, according to the country. If the field is empty, no expansion for the leading '+' will be
done.
To Next Page
Loading...
