Avaya Scopia XT7000 Series - Page 79

© 2016 Avaya Inc. All rights reserved. NDA Confidential; use pursuant to your agreement.
Release Notes for Avaya Scopia® XT Series Known Issues | 79
share content (via BFCP)
with Avaya 1000-series
endpoints.
QC#22592
QC#22593
Cisco C20/SX20 SIP
presentation interoperability
issue when it placed a call
towards an XT5000 MCU
Upgrade CISCO C20 to latest version.
RVSM-5252
If XT is configured with
Unicode name the ECS
rejects the H.323 call
Use a plain ASCII name for XT
QC#26201
Tandberg MXP Series
interoperability issue when
placing SIP TLS calls.
Configure > Advanced > Protocols > SIP > TLS >
Enabled =No
RVELITE-6045
Presentation, sent in WCS
mode from an XT, is sent
black from MCU7000 to
other XT (8.3.x or not in WCS
mode)
In a Call
QC#9510
You cannot dial a recent
incoming ISDN number from
the Recent Calls list.
(Incident #156601)
Dial the ISDN number manually.
QC#9509
Before making an ISDN
voice-only call, you need to
first change the service
mode to manual.
(Incident #156599)
To make an ISDN Voice-Only call, perform the
following procedure:
From the web interface, select Administrator
Settings > Calls > Preferences > ISDN and
change the Service Mode to Manual.
Insert a different Service Code for 64K calls.
Add the same Service Code to the Gateway
Service Prefixes List and specify the type as
voice-only.
Dial the ISDN/PSTN number and select 64K as
the required Call Rate (Advanced call options).
In a Meeting
MCURVELITE-
3000
MCU6000 doesn't manage
correctly the XT video
privacy option ( auto or hide
video) when in a sip call
Configure > Advanced > System >
Customization >
Set Privacy Options = Image
If you are using multiple
monitors and there is no
presentation, you cannot
select the PIP layout.
RVXT5000-131
When connecting to a XT
embedded meeting not as
first terminal, the arrows in
FECC page are not displayed
after "Control Far" selecting.
The camera of the active speaker in the
embedded MCU can be moved anyway
QC#22715
XT cannot send or receive
presentation if there is only
one XT Desktop Client in the
conference and that Client
does not have a webcam.
Embedded MCU license
cannot be enabled on
systems with CPU version
lower than 2.0
Software
Upgrade &
Downgrade
Upgrading to 9.x
using
USB/AT/Web
A signed package version
cannot be uploaded directly
on an XT running a version
8.3.x or earlier by USB or XT
Please open a specific Service Request at
https://support.avaya.com to receive the
unsigned package for XTSeries 9.0.x.