Avaya VSP 7000 Series Installing

The following table shows the supported QSFP+ transceivers.
Table 5: Supported QSFP+ transceivers
QSFP+ device Order code
40GBase–SR4 transceiver multifiber push-on (MPO) or multifiber
termination push-on (MTP) connector
AA1404005-E6
QSFP+ to QSFP+ 40 Gigabit Direct Attach Cable — 3.3 feet (1 meter)
(Passive)
AA1403029-E6
QSFP+ to QSFP+ 40 Gigabit Direct Attach Cable — 7 feet (2 meters)
(Passive)
AA1403030-E6
QSFP+ to QSFP+ 40 Gigabit Direct Attach Cable — 10 feet (3
meters) (Passive)
AA1403031-E6
QSFP+ to QSFP+ 40 Gigabit Direct Attach Cable — 16 feet (5
meters) (Passive)
AA1403032-E6
Media Dependent Adapter
The Media Dependent Adapter (MDA) is a field-replaceable expansion module that provides
additional capacity on the Avaya Virtual Services Platform 7000 (VSP 7000) Series.
The VSP 7000 Series provides 24 fixed ports, and each switch supports the installation of one MDA
to increase the number of ports. The fixed ports are numbered 1 through 24 and MDA port numbers
range from 25 to 32, depending on the model of MDA installed.
The VSP 7000 Series supports the following MDA modules:
• 7008XLS-MDA — provides eight SFP+ ports
• 7008XT-MDA — provides eight 10GBASE-T ports
Note:
Half duplex is not supported on 10GBASE-T ports.
Media Dependent Adapter
August 2014 Installing Avaya VSP 7000 Series 59
Comments? infodev@avaya.com

Avaya VSP 7000 Series Specifications

General

Brand	Avaya
Model	VSP 7000 Series
Category	Switch
Language	English