8
Chapter 2 Main System Configuration
2.1 Getting Started
1. Connect the power cable and mouse to NVR/DVR unit.
2. Power on the NVR/DVR unit and wait for NVR/DVR system start up processing to
complete.
3. For security purpose, the NVR/DVR system would require user to enter User ID and
Password before it can be accessed. (If this is the first time, enter the default ID [admin]
and password [admin]).
4. After login successful, the preview UI is displayed.
5. Next, setup the following settings in order to start monitoring.
To Next Page
Loading...
