Use the entire area of the screen to only display the video. To
return, press the right button of the mouse or ESC on the
keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click
to toggle to only display one of the video in the multiple-screen
mode or all.
Catch a static recording image and save it as a JPG file in USB
pen drive device.
1. Select the channel or all channels.
2. Plug the USB pen drive to NVR/DVR unit.
3. Click Snapshot ( ) button.
4. In Snapshot dialog box, check the Save path has been
detected by NVR/DVR system. If the save path doesn’t found,
click Rescan Device button to re-detect it.
5. If user wants to re-name the File name, call out the virtual
keyboard and enter the new file name in File name column.
6. Click OK to capture and save the screen shot.
7. The captured and saved screen image can be viewed on PC.
To Next Page
Loading...
