EasyManua.ls Logo

AVer VB342 Pro - Bluetooth Connectivity

AVer VB342 Pro
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
3. Bluetooth
To start using the Bluetooth function, ensure to power-off the
camera and then plug-in the BT dongle to the USB port on the
camera. After that, power-on the camera.
Hold it for 1~2 sec to enable Bluetooth pairing with mobile phone
or AVer FONE540 speakerphone.
Short press it again to disconnect Bluetooth.
[Note] BT dongle is an optional item. Please contact your local dealer
for purchasing. Bluetooth connection with FONE540 speakerphone is
currently unavailable. New FW will be supported in Q3/ 2022.
4. Mute/Unmute
Mute/Unmute the speakerphone.
5. Camera Directional
Control
Use the directional button on the remote to control the direction of the
camera. Press the directional button to move the camera or press
and hold for continuous pan or tilt.
6. Enter
Press to show the current AI function on screen such as Auto
Framing. When pressing this button, it will also force camera to do
manual focus for once at the same time.
7. Call/Answer
Answer a call or start a call.
8. End Call
End the call.
9. OSD Menu
Short press to pull out gesture control guide.
10. Load Preset Hotkey
Press to move to preset position as user has set in sequence.
11. Zoom In/Zoom Out
Increase/Decrease the camera zoom.
12. Volume Up/Down
Adjust volume up or down.
13. Compound Key
When pressing this button, the following photo will show up. Then
press the corresponding number key for setting up specific
function.
WDR: Press then to enable/disable the WDR
function.
Set Preset: Press then to enable/disable the Set
Preset function.
RTMP: Press then to enable/disable the RTMP
streaming function.
Sleep Mode: Press then to force camera to enter
sleep mode. If there is USB streaming, this function wont work.
14. Number Buttons/Preset
Position
Long press the number button to set the preset point.
One-click the number button to load the preset point.
15. Brightness -
Press this button to decrease image brightness level.
16. Brightness +
Press this button to increase image brightness level.

Other manuals for AVer VB342 Pro

Related product manuals