AVERATEC AV5110HS - 6.6 Exiting the Setup Program

Customizing Your Notebook 6
93
• F12 Multi Boot Menu
Lets you specify Enabled or Disabled for activating or inactivating the
Multi Boot function by pressing F12 function key when system is
booting.
• PXE Boot with WOL
This field is for information only as whether the BIOS can automatically
detect the PXE Boot with WOL status or not.
• Boot Sequence
To select the boot device, you can use the up or down arrow key, then
press <+> to move up the device in the list or press <-> to move down
the device in the list.
6.6 How to Exit the Setup Program
There are two choices to escape from the Setup program.
Phoenix BIOS Setup Utility
Main Advanced Security Boot Exit
Item Specific Help
Exit Saving Changes
Exit System Setup
Exit Discarding Changes
and save your
Load Setup Defaults
changes to CMOS.
Discard Changes
Save Changes
F1
Help á â
Select Item F5/F6
Change Values F9 Setup Defaults
Esc
Exit ß-- Select Menu Enter
Execute Command F10 Save and Exit