Loading Supplies 2-7
Loading Labels for Peel Mode (Optional)
In peel mode, the printer separates the liner from the label. This is known as on-demand
mode printing. The next label is not printed until the completed one is removed from the
printer or when you press FEED. The display shows "Printing X of Y" until all labels print.
♦ minimum feed length is 1.5 inches.
♦ maximum speed is 8.0 inches per second.
♦ use non-perforated supplies.
Notes: Your System Administrator must set the printer for on-demand mode and the
correct supply type.
1. Open the cover.
2. Turn the printhead latch to unlock the printhead.
To Next Page
Loading...
