Care & Maintenance 5-1
CARE & MAINTENANCE
This chapter tells you how to
♦ clear label jams and clean the printer.
♦ replace a printhead.
CAUTION: Do not use sharp objects to clean the printhead or touch the printhead with
your fingers. This may damage the printer and require a service charge.
Clearing Label Jams
When a jam occurs, you see
To clear the jam:
1. Open the cover and printhead assembly.
2. If necessary, remove the label roll and ribbon.
3. Remove the jammed labels.
4. Reload the label roll and/or ribbon.
5. Close the printhead assembly.
6. Press ENTER to clear the error.
7. Press FEED to position the supply under the printhead.
ENTER ESCAPE
To Next Page
Loading...
