13
3INSTALLATION AND DEINSTALLATION
2.1 UNPACKING, ASSEMBLING AND CONNECTING THE MACHINE
ALS
20X
256
2.1.1 Transport
CAUTION!
To avoid damaging the machine during
transport:
Only transport the machine in its original
packaging.
Keep the original packaging for a later
transport.
2.1.2 Unpacking
WARNING!
Acute risk of injury and long-term bodily in-
jury from working with heavy loads!
Lift or carry the machine with a minimum
of 2 persons. If possible, use a crane or
other lifting device.
CAUTION!
To avoid damaging the machine during un-
packing:
Never hold the machine by the deflection
rollers, dancer arm or rewind or unwind
unit.
Lift the machine out of the packaging with at least
two persons.
– To do so, hold the machine by its casing.
After unpacking, check the machine for visible ship-
ment damage.
Alternatively, the machine can be lifted with a
crane.
To do so, screw an eye ring M10 into the lo-
cation shown in [2A].
[2] Attachment of an eye ring M10 (A) for transportation with a
crane.
2 INSTALLATION AND DEINSTALLATION
2.1 UNPACKING, ASSEMBLING AND CONNECTING THE MACHINE
To Next Page
Loading...
