04/10 Rev. 5.05-00 USER / SERVICE MANUAL Technical Data
AP5.4 – AP5.6
11
Electronic Configuration
Specifications only for AP5.4/5.6 dispenser
• Speed, while the rewinding-Ø is calculated: 75mm/s (3“/s)
• Speed, while the material is fed back: 75mm/s (3“/s)
• Distance dispensing edge - print zero line: 25mm
• Distance punch sensor - print zero line: 71mm
• Max. admissible outer diameter of the rewound backing paper roll: 120mm
Environmental Conditions
Operating Temperature 5 to 40°C
Storage Temp. -4 to 60°C
Relative Humidity 30-85% (non-condensing)
Protection category IP 21
Noise 70dB(A)
Feature Details
CPU 32bit RMI
RAM 32MB SDRAM
ROM 4MB Flash
Memory card SD
Realtime-clock Present
Control Panel
4 buttons; LCD graphics display with 128x32 pixels; typi-
cally used to display two text lines with 16 characters each
[Tab. 9] Electronic configuration of the AP 5.4/5.6.
To Next Page
Loading...
