04/10 Rev. 5.05-00 USER / SERVICE MANUAL Technical Data
AP5.4 – AP5.6
5
Performance Data
Print Technology Thermodirect and thermotransfer printing
Printer Head Type
• “Flat Head” type (ceramic thin film flat head)
• 8.0dot/mm (203dpi)
• 11.8dot/mm (300dpi)
Printhead
Characteristics
Label sensor
¯ The dark/light change at the reflex sensor is taken as the label beginning
(= end of the reflex mark)
[2] Measures and setting range of the punch / reflex mark.
Printer
Resolution
(Dot/mm)
Resolution
(dpi)
Print-
speed
(mm/s)
Print-
speed
(Inch/s)
Max. printwidth
(mm)
AP5.4
8.0
11.8
203
300
50-200
50-150
2-8
2-6
104
105.7
AP5.6
8.0
11.8
203
300
50-200
50-150
2-8
2-6
168
[Tab. 3] Important printhead data.
Sensor type
Setting range
(Size c)
Punch length
(Size b)
Punch width
(Size a)
Transmission sensor
(Standard)
0–60 mm 0.8–14mm min. 4mm
Reflex-sensor
(optional)
6–66mm
4mm
(recommended)
12mm
(recommended)
[Tab. 4] Required punch measures.
a
b
c
Z0211.cdr
Punch / Reflex markPunch sensor Label web
To Next Page
Loading...
