04/10 Rev. 5.05-00 USER / SERVICE MANUAL Technical Data
AP5.4 – AP5.6
9
Label Stock
Material Types Thermodirect material, thermotransfer material, synthetic ribbons: PE, PP,
PVC, PA in rolls or fan-folded.
Material Thickness
• Self-adhesive labels: 60- 160 g/m
2
• Cardboard labels:
– AP 5.4: max. 240g/m
2
– AP 5.6: max. 190g/m
2
Material Width
Label Length
Gap size Gap size between the labels on the backing material:
• min.: 1.0mm
• max.: Label length-15 mm
Label Roll
• Winding Direction: Labels facing inward or outward, internal rewinder: la-
bels facing outwards
• Roll diameter:
• Core diameter: 38.1mm (1.5“), 76.2 mm (3“) oder 101.6 mm(4“); cores with
76.2 (3“) or 101.6mm (4“) can be applied with the core adapter supplied
with the printer.
Printer type Min. width Max. width Passage width
AP5.4 15mm 115mm 120mm
AP5.4 dispenser 30mm 105mm 110mm
a)
a) The material passage width is limited by the dispensing sensor, which is mounted at the side. If a dis-
pensing edge without a sensor is applied (foot switch operation), the passage width is as large as at
the standard printer.
AP5.6 50mm 180mm 185mm
AP5.6 dispenser 50mm 170mm 175mm
a)
[Tab. 5] Overview material width.
Printer Min. length Max. length
AP5.4 5mm max. print width
a)
a) See Max. print length on page 6.
AP5.4 dispenser 30mm 200mm
AP5.4 dispenser
b)
b) With optional label sensor for short labels.
5mm 200mm
AP5.6 5mm max. print width
a)
AP5.6 dispenser 30mm 200mm
[Tab. 6] Overview label length.
Roll / Conditions Roll Ø
Label roll for normal printing operation max. 210mm
Label roll for dispensing operation (with 100mm core-Ø) max. 190 mm
Take-up roll for winding/dispenser operation max. 120mm
[Tab. 7] Diameter of material and winding roll
To Next Page
Loading...
