12/08 Rev. 5.01-01 USER MANUAL Commissioning & Operation
AP7.t
18
Inserting a CF
card
1. Switch off the printer. Wait for 5 seconds.
2. Insert the CF card [11A] completely into the card slot, contact side first. The
card’s label is on the right side.
¯ Push the CF card into the slot until the release button [11B] comes out.
The inserted card will sit flush with the back wall of the housing.
¯ The differently sized guide notches [10] of the CF card prevent the card
from being inserted wrongly. For the card to be inserted correctly, the wider
guide notch needs to be on top.
[11] Inserting the CF card. If the CF card has been inserted correctly, it will sit flush with the
printer’s back wall (right).
P For more detailed information on how to use CF cards, please refer to the
Plugin Card Manual, Application
, “CompactFlash Card”.
Setting the realtime clock
The AP7.t’s realtime clock can be used, for example, to calculate and print
the expiry date of a perishable product.
This is how you set the realtime clock:
1. Navigate to the
SYSTEM PARAMETER > Realtime Clock.
2. To enter the date and time, use the Cut button to shift the cursor, the Feed
button to change the parameter, and the Online button to save it.
P To find out how to set parameters, see Info-Printouts and Parameters.
Realtime clock
dd.mm.yyyy hh:mm
dd = day, mm = month, yyyy = year, hh = hour,
mm = minute
A
B
To Next Page
Loading...
